chip inductors - 0402cs series (1005) document 198-1 specifications subject to change without notice. document 198-1 revised 1/11/00 srf r dc i dc inductance 2 percent q min 5 max 6 max 7 900 mhz 1.7 ghz part number 1 (nh) tolerance 3 min 4 (mhz) (ohms) (ma) l typ q typ l typ q typ 0402cs-1n0x_by 1.0 @ 250 mhz 10 ,5 16 >6000 0.045 1360 1.02 77 1.02 69 0402cs-2n0x_by 2.0 @ 250 mhz 10,5 16 >6000 0.070 1040 1.93 54 1.93 75 0402cs-2n2x_by 2.2 @ 250 mhz 10,5 19 >6000 0.070 960 2.19 59 2.23 100 0402cs-3n3x_by 3.3 @ 250 mhz 10,5 19 6000 0.066 840 3.10 65 3.12 87 0402cs-3n6x_by 3.6 @ 250 mhz 10,5 19 6000 0.066 840 3.56 45 3.62 71 0402cs-3n9x_by 3.9 @ 250 mhz 10,5 19 5800 0.066 840 3.89 50 4.00 75 0402cs-5n1x_by 5.1 @ 250 mhz 10,5 20 5800 0.083 800 5.15 56 5.25 82 0402cs-5n6x_by 5.6 @ 250 mhz 10,5 20 5800 0.083 760 5.16 54 5.28 81 0402cs-6n2x_by 6.2 @ 250 mhz 10,5 20 5800 0.083 760 6.16 52 6.37 76 0402cs-7n5x_by 7.5 @ 250 mhz 10,5 22 5800 0.104 680 7.91 60 8.22 88 0402cs-8n2x_by 8.2 @ 250 mhz 10,5 22 4400 0.104 680 8.50 57 8.85 84 0402cs-9n0x_by 9.0 @ 250 mhz 10,5 22 4160 0.104 681 9.07 62 9.53 78 0402cs-10nx_by 10 @ 250 mhz 10,5 21 3900 0.195 480 9.8 50 10.1 67 0402cs-11nx_by 11 @ 250 mhz 10,5 24 3680 0.120 640 10.7 52 11.2 78 0402cs-12nx_by 12 @ 250 mhz 10,5 24 3600 0.120 640 11.9 53 12.7 71 0402cs-15nx_by 15 @ 250 mhz 10,5 24 3280 0.172 560 14.6 55 15.5 77 0402cs-19nx_by 19 @ 250 mhz 10,5 24 3040 0.202 480 19.1 50 21.1 67 0402cs-23nx_by 23 @ 250 mhz 10,5 24 2720 0.214 400 23.8 49 26.9 64 0402cs-27nx_by 27 @ 250 mhz 10,5 24 2480 0.298 400 28.7 49 33.5 63 0402cs-36nx_by 36 @ 250 mhz 10,5 24 2320 0.403 320 39.5 44 48.4 53 0402cs-40nx_by 40 @ 250 mhz 10,5 24 2240 0.438 320 39.0 44 47.4 33 0402cs-47nx_by 47 @ 250 mhz 10,5 20 2100 0.830 150 50.0 38 - - coilcraft is introducing the industry?s first 0402 wire- wound inductor. this new series shares all of the characteristics of coilcraft?s other ceramic inductors: exceptionally high q factors, especially at use frequencies; outstanding srfs; tight inductance tolerances; and excellent batch-to-batch consistency. coilcraft designer?s kit c128 contains samples of all inductance values (5% tolerance where available). to order, contact coilcraft or visit http://order.coilcraft.com. for environmental data see ?product specifications? section (document 121). 1. when ordering, please specify tolerance and packaging codes: 0402cs-40nx_by packaging y = eia rs-481 paper carrier (standard). for orders of less than a full reel, there is a $25 per reel charge to make them machine-ready. b = in a carrier tape but without leader or trailer. inductance tolerance j =5%, k =10% table above shows stock tolerances in bold. 2. inductance measured using coilcraft smd-a fixture in hp4286 impedance analyzer with coilcraft-provided correlation pieces. for recommended test procedures, contact coilcraft. 3. tolerances in bold are stocked for immediate shipment. 4. q measured using hp4291a with hp16193 test fixture. 5. srf measured using hp8753d network analyzer and coilcraft smd-d test fixture. 6. r dc measured on micro-ohmmeter. 7. for 15 c rise. 8. operating temperature range -40 c to +125 c. 9. electrical specifications at 25 c.
0402cs (1005) chip inductors typical q vs frequency specifications subject to change without notice. document 198-2 revised 11/5/99 document 198-2 typical l vs frequency abc defghij max. max. max. ref. .047 .025 .026 .010 .020 .009 .022 .026 .014 .018 1,19 0,64 0,66 0,25 0,51 0,23 0,56 0,66 0,36 0,46 s-parameter files pspice models see doc 158 on our web site or cd parts/reel: 7" 2000 tape width: 8 mm for packaging data see ?tape and reel specifications? section (doc. 173)
|